|
How to Install Towel Bars
1.) Select the location and height for your towel bar, using a pencil mark it.
2.) Drill a smaller size hole than the screw you are using. If you hit a stud you may use the screws furnished with towel bar. If there is no stud where you drilled you need to use hollow wall anchors.
3.) Attach only one wall bracket first.
4.) Insert the towel bar into the bracket. Now lay a level on the bar and slowing move the bar up and down reading the bubble to the level position.
5.) Mark it with a pencil.
6.) Add the second bracket.
Tool and Supply Checklist
Tape Measure
Pencil
Level
Drill and Bits
Screwdriver
Screws
Hollow Wall Anchors
|
